You can receive various level*  and module* completions for NCCER’s Core curriculum, Instrumentation, Electrical, Industrial Maintenance E & I Technician, Power Generation I & C Maintenance Technician and Power Generation Maintenance Electrician, PLUS an additional 48 modules* in the following craft* areas: Industrial Maintenance Mechanic, Power Line Worker, Pipefitting, Sustainable Construction and Safety Technology. In the chart below, an X next to a module indicates you are eligible to receive credit for that module.

If an X does not appear next to a module then additional training is required for the craft level* completion. Each module builds upon one another to accomplish a level completion and this information is tracked in NCCER’s Registry System.  An industry- recognized credential* is awarded with level completions and each craft usually has three to four levels.

*Refer to NCCER’s definitions located on the right side of the screen to fully understand these terms.

Core

NCCER's Core curriculum is a prerequisite to all other Level 1 craft curriculum and gives the trainee the basic skills needed to continue education in any craft area he or she chooses.

CraftLevelModuleTitleCredit
CoreN/A00101-15Basic Safetyx
CoreN/A00102-15Introduction to Construction Mathx
CoreN/A00103-15Introduction to Hand Toolsx
CoreN/A00104-15Introduction to Power Toolsx
CoreN/A00105-15Introduction to Construction Drawingsx
CoreN/A00106-15Introduction to Basic Riggingx
CoreN/A00107-15Basic Communication Skillsx
CoreN/A00108-15Basic Employability Skillsx
CoreN/A00109-15Introduction to Material Handlingx

Industrial Maintenance E & I Technician

This four-level curriculum covers topics such as Fasteners and Anchors, Process Mathematics, and Pneumatic Controls.

CraftLevelModuleTitleCredit
Industrial Maintenance E & I140101-07Orientation to the Tradex
Industrial Maintenance E & I140102-07Tools for the Tradex
Industrial Maintenance E & I140103-07Fasteners and Anchorsx
Industrial Maintenance E & I140104-07Oxyfuel Cuttingx
Industrial Maintenance E & I140105-07Gaskets and Packingx
Industrial Maintenance E & I140106-07Craft-Related Mathematicsx
Industrial Maintenance E & I140107-07Construction Drawingsx
Industrial Maintenance E & I140108-07Pumps and Driversx
Industrial Maintenance E & I140109-07Valvesx
Industrial Maintenance E & I140110-07Introduction to Test Instrumentsx
Industrial Maintenance E & I140111-07Material Handling and Hand Rigging
Industrial Maintenance E & I140112-07Mobile and Support Equipmentx
Industrial Maintenance E & I140113-07Lubricationx
Industrial Maintenance E & I240201-08Industrial Safety for E & I Techniciansx
Industrial Maintenance E & I240202-08Introduction to the National and Electrical Codex
Industrial Maintenance E & I240203-08Electrical Theoryx
Industrial Maintenance E & I240204-08Alternating Currentx
Industrial Maintenance E & I240205-08E & I Test Equipmentx
Industrial Maintenance E & I240206-08Flow, Pressure, Level and Temperaturex
Industrial Maintenance E & I240207-08Process Mathematicsx
Industrial Maintenance E & I240208-08Hand Bendingx
Industrial Maintenance E & I240209-08Tubingx
Industrial Maintenance E & I240210-08Clean, Purge and Test Tubing and Piping Systemsx
Industrial Maintenance E & I240211-08Instrument Drawing and Documents, Part Onex
Industrial Maintenance E & I240212-08Conductors and Cablesx
Industrial Maintenance E & I240213-08Conductor Terminations and Splicesx
Industrial Maintenance E & I340301-09Hazardous Locations
Industrial Maintenance E & I340302-09Electronic Componentsx
Industrial Maintenance E & I340303-09E & I Drawingsx
Industrial Maintenance E & I340304-09Motor Controlsx
Industrial Maintenance E & I340305-09Distribution Equipmentx
Industrial Maintenance E & I340306-09Transformer Applicationsx
Industrial Maintenance E & I340307-09Conductor Selection and Calculationsx
Industrial Maintenance E & I340308-09Temporary Groundingx
Industrial Maintenance E & I340309-09Layout and Installation of Tubing and Piping Systemsx
Industrial Maintenance E & I340310-09Machine Bending of Conduitx
Industrial Maintenance E & I340311-09Hydraulic Controlsx
Industrial Maintenance E & I340312-09Pneumatic Controlsx
Industrial Maintenance E & I340313-09Motor-Operated Valves
Industrial Maintenance E & I440401-09Standby and Emergency Systemsx
Industrial Maintenance E & I440402-09Basic Process Control Elements, Transducers
Industrial Maintenance E & I440403-09Instrumentation Calibration and Configuration
Industrial Maintenance E & I440404-09Pneumatic Control Valve, Actuators and Positioners
Industrial Maintenance E & I440405-09Performing Loop Checksx
Industrial Maintenance E & I440406-09Troubleshooting and Commissioning a Loopx
Industrial Maintenance E & I440407-09Data Network
Industrial Maintenance E & I440408-09Programmable Logic Controllersx
Industrial Maintenance E & I440409-09Distributed Control System

Industrial Maintenance Mechanic

NCCER’s four-level curriculum covers topics such as Oxyfuel Cutting, Introduction to Piping Components, and Laser Alignment.

CraftLevelModule IDModule TitleCredit
Industrial Maintenance Mechanic132101-07Orientation to the Trade
Industrial Maintenance Mechanic132102-07Tools of the Tradex
Industrial Maintenance Mechanic132103-07Fasteners and Anchorsx
Industrial Maintenance Mechanic132104-07Oxyfuel Cuttingx
Industrial Maintenance Mechanic132105-07Gaskets and Packingx
Industrial Maintenance Mechanic132106-07Craft-Related Mathematicsx
Industrial Maintenance Mechanic132107-07Construction Drawingsx
Industrial Maintenance Mechanic132108-07Pumps and Driversx
Industrial Maintenance Mechanic132109-07Valvesx
Industrial Maintenance Mechanic132110-07Introduction to Test Equipment
Industrial Maintenance Mechanic132111-07Material Handling and Hand Riggingx
Industrial Maintenance Mechanic132112-07Mobile and Support Equipment
Industrial Maintenance Mechanic132113-07Lubricationx
Industrial Maintenance Mechanic232201-07Basic Layout
Industrial Maintenance Mechanic232202-07Introduction to Piping Componentsx
Industrial Maintenance Mechanic232203-07Copper and Plastic Piping Practicesx
Industrial Maintenance Mechanic232204-07Introduction to Ferrous Metal Piping Practicesx
Industrial Maintenance Mechanic232205-07Identify, Install and Maintain Valvesx
Industrial Maintenance Mechanic232206-07Hydrostatic and Pneumatic Testing
Industrial Maintenance Mechanic232207-07Introductions to Bearingsx
Industrial Maintenance Mechanic232208-07Low-Pressure Steam Systemsx
Industrial Maintenance Mechanic232209-07High-Pressure Steam Systems and Auxiliaries
Industrial Maintenance Mechanic232210-07Distillation Towers and Vessels
Industrial Maintenance Mechanic232211-07Heaters, Furnaces, Heat Exchangers, Cooling Towers and Fin Fansx
Industrial Maintenance Mechanic232212-07Introduction to Tube Workx
Industrial Maintenance Mechanic332301-08Advanced Trade Mathx
Industrial Maintenance Mechanic332302-08Precision Measuring Toolsx
Industrial Maintenance Mechanic332303-08Installing Bearingsx
Industrial Maintenance Mechanic332304-08Installing Couplingsx
Industrial Maintenance Mechanic332305-08Setting Baseplates and Prealignment
Industrial Maintenance Mechanic332306-08Conventional Alignmentx
Industrial Maintenance Mechanic332307-08Installing Belt and Chain Drivesx
Industrial Maintenance Mechanic332308-08Installing Mechanical Sealsx
Industrial Maintenance Mechanic432401-09Preventive and Predictive Maintenance
Industrial Maintenance Mechanic432402-09Advanced Blueprint Reading
Industrial Maintenance Mechanic432403-09Compressors and Pneumatic Systems
Industrial Maintenance Mechanic432404-09Reverse Alignment
Industrial Maintenance Mechanic432405-09Laser Alignment
Industrial Maintenance Mechanic432406-09Introduction to Supervisory Skillsx
Industrial Maintenance Mechanic432407-09Troubleshooting and Repairing Pumpsx
Industrial Maintenance Mechanic432408-09Troubleshooting and Repairing Gearboxesx

Instrumentation

NCCER’s four-level addresses all of the learning objectives associated with this broad and demanding field, in areas such as Fasteners, Relays and Timers, and Grounding and Shielding of Instrumentation Wiring.

CraftLevelModule IDModule TitleCredit
Instrumentation112115-14Instrumentation Safety Practicesx
Instrumentation112114-14Hand and Power Tools for Instrumentationx
Instrumentation112119-14Craft-Related Mathematicsx
Instrumentation112107-14Instrument Drawing and Documents Part Onex
Instrumentation112304-14Inspect, Handle and Store Instrumentation Materialsx
Instrumentation112116-14Electrical Systems for Instrumentationx
Instrumentation112106-14Fastenersx
Instrumentation112108-14Gaskets, O-Rings and Packingx
Instrumentation112109-14Lubricants, Sealants and Cleanersx
Instrumentation112111-14Tubingx
Instrumentation112117-14Steel Piping Practicesx
Instrumentation112113-14Hosesx
Instrumentation212110-15Temperature, Pressure, Level and Flowx
Instrumentation212301-15Instrument Fitter's Mathx
Instrumentation212202-15Instrument Drawings and Documents Part Twox
Instrumentation233205-10Test Equipment
Instrumentation212212-15Panel-Mounted Instruments
Instrumentation212213-15Installing Field-Mounted Instruments
Instrumentation212214-15Raceways for Instrumentation
Instrumentation212303-15Clean, Purge and Test Tubing and Piping Systemsx
Instrumentation212308-15Protective Measures for Instrumentation
Instrumentation212302-15Layout and Installation of Tubing and Piping Systems
Instrumentation212210-15Instrument Air Filters, Regulators and Dryers
Instrumentation312207-16Control Valves, Actuators and Positionersx
Instrumentation312205-16Detectors, Secondary Elements, Transducers and Transmitters
Instrumentation312305-16Instrumentation Electrical Circuitryx
Instrumentation312208-16Relays and Timersx
Instrumentation312209-16Switches and Photoelectric Devicesx
Instrumentation312307-16Terminating Conductorsx
Instrumentation312306-16Grounding and Shielding of Instrumentation Wiringx
Instrumentation312204-16Process Control Theoryx
Instrumentation312206-16Controllersx
Instrumentation412402-16Instrument Calibration and Configuration
Instrumentation412410-16Proving, Commissioning and Troubleshooting a Loop
Instrumentation412405-16Tuning Loops
Instrumentation412401-16Digital Logic Circuits
Instrumentation412406-16Programmable Logic Controllersx
Instrumentation412407-16Distributed Control Systems
Instrumentation412409-16Analyzers and Monitersx

Power Generation I & C Maintenance Technician

This four-level curriculum covers topics such as Introduction to Test Instruments, Calibrate Supervisory Instrumentation Elements, and Boiler/HRSG Control.


CraftLevelModuleTitleCredit
Power Gen I & C Maintenance Tech140102-07Tools for the Tradex
Power Gen I & C Maintenance Tech140103-07Fasteners and Anchorsx
Power Gen I & C Maintenance Tech140104-07Oxyfuel Cuttingx
Power Gen I & C Maintenance Tech140105-07Gaskets and Packingx
Power Gen I & C Maintenance Tech140106-07Craft-Related Mathematicsx
Power Gen I & C Maintenance Tech140107-07Construction Drawingsx
Power Gen I & C Maintenance Tech140108-07Pumps and Driversx
Power Gen I & C Maintenance Tech140109-07Valvesx
Power Gen I & C Maintenance Tech140110-07Introduction to Test Instrumentsx
Power Gen I & C Maintenance Tech140111-07Material Handling and Hand Riggingx
Power Gen I & C Maintenance Tech140112-07Mobile and Support Equipmentx
Power Gen I & C Maintenance Tech40113-07Lubricationx
Power Gen I & C Maintenance Tech240201-08Industrial Safety for E & I Techniciansx
Power Gen I & C Maintenance Tech240202-08Introduction to the National and Electrical Codex
Power Gen I & C Maintenance Tech226501-09Managing Electrical Hazardsx
Power Gen I & C Maintenance Tech240203-08Electrical Theoryx
Power Gen I & C Maintenance Tech240204-08Alternating Currentx
Power Gen I & C Maintenance Tech240205-08E & I Test Equipmentx
Power Gen I & C Maintenance Tech240303-09E & I Drawingsx
Power Gen I & C Maintenance Tech240304-09Motor Controlsx
Power Gen I & C Maintenance Tech240311-09Hydraulic Controlsx
Power Gen I & C Maintenance Tech240312-09Pneumatic Controlsx
Power Gen I & C Maintenance Tech240408-09Programmable Logic Controllersx
Power Gen I & C Maintenance Tech240212-08Conductors and Cablesx
Power Gen I & C Maintenance Tech240213-08Conductor Terminations and Splicesx
Power Gen I & C Maintenance Tech312305-03Instrumentation Electrical Circuitryx
Power Gen I & C Maintenance Tech340207-08Process Mathematics
Power Gen I & C Maintenance Tech340206-08Flow, Pressure, Level and Temperature
Power Gen I & C Maintenance Tech312209-03Switches and Photoelectric Devicesx
Power Gen I & C Maintenance Tech340211-08Instrument Drawings and Documents, Part One
Power Gen I & C Maintenance Tech312306-03Grounding and Shielding of Instrumentation Wiringx
Power Gen I & C Maintenance Tech312104-01Electrical Systems for Instrumentationx
Power Gen I & C Maintenance Tech312208-03Relays and Timersx
Power Gen I & C Maintenance Tech340209-08Tubing
Power Gen I & C Maintenance Tech340210-08Clean, Purge and Test Tubing and Piping Systems
Power Gen I & C Maintenance Tech340309-09Layout and Installation of Tubing and Piping Systems
Power Gen I & C Maintenance Tech340302-09Electrical Components
Power Gen I & C Maintenance Tech312212-03Panel-Mounted Instruments
Power Gen I & C Maintenance Tech312213-03Installing Field-Mounted Instruments
Power Gen I & C Maintenance Tech312408-03Analyzers
Power Gen I & C Maintenance Tech440401-09Standby and Emergency Systemsx
Power Gen I & C Maintenance Tech440402-09Basic Process Control Elements, Transducers
Power Gen I & C Maintenance Tech440403-09Instrumentation Calibration and Configuration
Power Gen I & C Maintenance Tech440404-09Pneumatic Control Valve, Actuators and Positioners
Power Gen I & C Maintenance Tech440405-09Performing Loop Checksx
Power Gen I & C Maintenance Tech440406-09Troubleshooting and Commissioning a Loopx
Power Gen I & C Maintenance Tech412204-03Process Control Theoryx
Power Gen I & C Maintenance Tech440407-09Process Control Loops and Tuning
Power Gen I & C Maintenance Tech440407-09Data Network
Power Gen I & C Maintenance Tech412401-03Digital Logic Circuits
Power Gen I & C Maintenance Tech440408-09Programmable Logic Controllersx
Power Gen I & C Maintenance Tech451401-10Calibrate Supervisory Instrumentation Elementsx
Power Gen I & C Maintenance Tech451402-10Boiler/HRSG Control
Power Gen I & C Maintenance Tech432401-09Preventive and Predictive Maintenance
Power Gen I & C Maintenance Tech440409-09Distributed Control System

Power Generation Maintenance Electrician

This four-level curriculum covers topics including Gaskets and Packing, Vibration and Balancing, and Fuel Preparation and Delivery Equipment.


CraftLevelModuleTitleCredit
Power Gen Maintenance Electrician 140102-07Tools for the Tradex
Power Gen Maintenance Electrician 140103-07Fasteners and Anchorsx
Power Gen Maintenance Electrician 140104-07Oxyfuel Cuttingx
Power Gen Maintenance Electrician 140105-07Gaskets and Packingx
Power Gen Maintenance Electrician 140106-07Craft-Related Mathematicsx
Power Gen Maintenance Electrician 140107-07Construction Drawingsx
Power Gen Maintenance Electrician 140108-07Pumps and Driversx
Power Gen Maintenance Electrician 140109-07Valvesx
Power Gen Maintenance Electrician 140110-07Introduction to Test Instrumentsx
Power Gen Maintenance Electrician 140111-07Material Handling and Hand Riggingx
Power Gen Maintenance Electrician 140112-07Mobile and Support Equipmentx
Power Gen Maintenance Electrician 140113-07Lubricationx
Power Gen Maintenance Electrician 129107-09SMAW Equipment and Setupx
Power Gen Maintenance Electrician 240201-08Industrial Safety for E & I Techniciansx
Power Gen Maintenance Electrician 226501-09Managing Electrical Hazardsx
Power Gen Maintenance Electrician 240202-08Introduction to the National and Electrical Codex
Power Gen Maintenance Electrician 240203-08Electrical Theoryx
Power Gen Maintenance Electrician 240204-08Alternating Currentx
Power Gen Maintenance Electrician 240303-09E&I Drawingsx
Power Gen Maintenance Electrician 240205-08E & I Test Equipmentx
Power Gen Maintenance Electrician 240304-09Motor Controlsx
Power Gen Maintenance Electrician 240311-09Hydraulic Controlsx
Power Gen Maintenance Electrician 240312-09Pneumatic Controlsx
Power Gen Maintenance Electrician 240409-09Programmable Logic Controllersx
Power Gen Maintenance Electrician 240212-08Conductors and Cablesx
Power Gen Maintenance Electrician 240213-08Conductor Terminations and Splicesx
Power Gen Maintenance Electrician 326206-08Conductor Installationsx
Power Gen Maintenance Electrician 326207-08Cable Tray
Power Gen Maintenance Electrician 326209-08Ground and Bondingx
Power Gen Maintenance Electrician 340208-08Hand Bending
Power Gen Maintenance Electrician 340310-09Machine Bending of Conduit
Power Gen Maintenance Electrician 326203-08Electric Lightingx
Power Gen Maintenance Electrician 326303-08Practical Applications of Lighting
Power Gen Maintenance Electrician 340301-09Hazardous Locations
Power Gen Maintenance Electrician 326210-08Circuit Breakers and Fusesx
Power Gen Maintenance Electrician 340303-09Transformer Applications
Power Gen Maintenance Electrician 340305-09Distribution Equipment
Power Gen Maintenance Electrician 350301-11Power Plant Electrical Systemsx
Power Gen Maintenance Electrician 340307-09Conductor Selection and Calculations
Power Gen Maintenance Electrician 326202-08Motors: Theory and Applicationx
Power Gen Maintenance Electrician 326202-08Motor-Operated Valves
Power Gen Maintenance Electrician 326211-08Control Systems and Fundamental Conceptsx
Power Gen Maintenance Electrician 340308-09Temporary Grounding
Power Gen Maintenance Electrician 426301-08Load Calculations- Branch and Feeder Circuitsx
Power Gen Maintenance Electrician 426309-08Motor Calculationsx
Power Gen Maintenance Electrician 426305-08Overcurrent Protectionx
Power Gen Maintenance Electrician 426406-08Specialty Transformersx
Industrial Maintenance E & I426407-08Advanced Controlsx
Power Gen Maintenance Electrician 426410-08Motor Operation and Maintenancex
Power Gen Maintenance Electrician 450401-10Generator Maintenancex
Power Gen Maintenance Electrician 450402-11Switchgear and Breaker Maintenancex
Power Gen Maintenance Electrician 432401-09Preventative and Predictive Maintanence
Power Gen Maintenance Electrician 426411-08Medium Voltage Termination/Splicesx
Power Gen Maintenance Electrician 426405-08Fire Alarm System
Power Gen Maintenance Electrician 426409-08Heat Tracing and Freeze Protection
Power Gen Maintenance Electrician 440401-09Standby and Emergency Systems

Electrical

To prepare trainees for a career in the electrical field, NCCER offers a comprehensive, four-level Electrical curriculum that complies with DOL time-based standards for apprenticeship.

CraftLevelModuleTitleCredit
Electrical126101-14Orientation to the Electrical Tradex
Electrical126102-14Electrical Safetyx
Electrical126103-14Introduction to Electrical Circuitsx
Electrical126104-14Electrical Theoryx
Electrical126205-14Introduction to the National Electrical Code¬x
Electrical126106-14Device Boxesx
Electrical126107-14Hand Bendingx
Electrical126108-14Raceways and Fittings
Electrical126109-14Conductors and Cablesx
Electrical126110-14Basic Electrical Construction Drawingsx
Electrical126111-14Residential Electrical Systems
Electrical126112-14Electrical Test Equipmentx
Electrical226201-14Alternating Currentx
Electrical226202-14Motors: Theory and Applicationx
Electrical226203-14Electric Lighting
Electrical226204-14Conduit Bendingx
Electrical226205-14Pull and Junction Boxes
Electrical226206-14Conductor Installationsx
Electrical226207-14Cable Trayx
Electrical226208-14Conductor Terminations and Splicesx
Electrical226209-14Grounding and Bondingx
Electrical226210-14Circuit Breakers and Fusesx
Electrical226211-14Control Systems and Fundamental Concepts
Electrical326301-14Load Calculations - Branch and Feeder Circuitsx
Electrical326302-14Conductor Selection and Calculationsx
Electrical326303-14Practical Applications of Lighting
Electrical326304-14Hazardous Locations
Electrical326305-14Overcurrent Protectionx
Electrical326306-14Distribution Equipment
Electrical326307-14Transformersx
Electrical326308-14Commercial Electrical Services
Electrical326309-14Motor Calculationsx
Electrical326310-14Voice, Data, and Video
Electrical326311-14Motor Controls
Electrical426401-14Load Calculations - Feeders and Servicesx
Electrical426402-14Health Care Facilities
Electrical426403-14Standby and Emergency Systemsx
Electrical426404-14Basic Electronic Theory
Electrical426405-14Fire Alarm Systems
Electrical426406-14Specialty Transformersx
Electrical426407-14Advanced Controlsx
Electrical426408-14HVAC Controls
Electrical426409-14Heat Tracing and Freeze Protection
Electrical426410-14Motor Operation and Maintenancex
Electrical426411-14Medium-Voltage Terminations/Splices
Electrical426412-14Special Locations
Electrical446101-11Fundamentals of Crew Leadership

Power Line Worker

Power Line Worker Level One addresses the fundamental aspects of power line work to include safety, electrical theory, climbing techniques, aerial framing and rigging, and operating utility service equipment. After Level One, this training program diverges into the three specialty areas for two additional years of skills training.

CraftLevelModuleTitleCredit
Power Line Worker149102-11Power Line Worker Safety
Power Line Worker149103-11Introduction to Electrical Circuitsx
Power Line Worker149104-11Introduction to Electrical Theoryx
Power Line Worker149105-11Climbing Wood Poles
Power Line Worker149106-11Climbing Other Structures Than Wood
Power Line Worker149107-11Tools of the Trade
Power Line Worker149108-11Aerial Framing and Associated Hardware
Power Line Worker149109-11Utility Service Equipment
Power Line Worker149110-11Rigging
Power Line Worker149111-11Setting and Pulling Poles
Power Line Worker149112-11Trenching, Excavating and Boring Equipment
Power Line Worker149113-11Introduction to Electrical Test Equipmentx
Power Line Worker: Distribution280201-11Alternating Current and Three-Phase Systemsx
Power Line Worker: Distribution280202-11Aerial Distribution Equipmentx
Power Line Worker: Distribution280203-11Cable and Conductor Installation and Removalx
Power Line Worker: Distribution280204-11Underground Residential Distribution (URD)x
Power Line Worker: Distribution280205-11Overhead and URD Service Installations
Power Line Worker: Distribution280206-11Distribution Line Maintanence
Power Line Worker: Distribution382201-12Introduction to Substations
Power Line Worker: Distribution380301-12Live-Line Work
Power Line Worker: Distribution380302-12Three-Phase URD Systems
Power Line Worker: Distribution380303-12System Protection and Monitoringx
Power Line Worker: Distribution380304-12Troubleshootingx
Power Line Worker: Distribution380305-12Introduction to Smart Grids
Power Line Worker: Distribution346101-11Fundamentals of Crew Leadership
Power Line Worker: Substation282201-12Introduction to Substations
Power Line Worker: Substation226501-12Managing Electrical Hazardsx
Power Line Worker: Substation280201-12Alternating Current and Three-Phase Systems
Power Line Worker: Substation282202-12Conductors and Cablesx
Power Line Worker: Substation226207-11Cable Tray
Power Line Worker: Substation226204-11Conduit Bending
Power Line Worker: Substation226206-11Conductor Installations
Power Line Worker: Substation226208-11Conductor Terminations and Splicing
Power Line Worker: Substation282203-12Grounding Systemsx
Power Line Worker: Substation222016-12Grades
Power Line Worker: Substation2082204-12Concrete Work
Power Line Worker: Substation282205-12Mechanical Construction Methods and Materials
Power Line Worker: Substation238201-11Intermediate Rigging
Power Line Worker: Substation340308-09Temporary Grounding
Power Line Worker: Substation382301-12Advanced Drawing Reading
Power Line Worker: Substation382302-12Medium and High Voltage Equipment Installation
Power Line Worker: Substation382303-12Control House
Power Line Worker: Substation382304-12Connectors, Conductor Terminations and Splicingx
Power Line Worker: Substation382305-12Equipment Testing and Maintenancex
Power Line Worker: Substation382306-12System Protection and Controlx
Power Line Worker: Substation346101-11Fundamentals of Crew Leadership
Power Line Worker: Transmission280201-11Alternating Current and Three-Phase Systems
Power Line Worker: Transmission281201-11Transmission Structure Rigging
Power Line Worker: Transmission281202-11Transmission Structure Erection
Power Line Worker: Transmission281203-11Transmission Structure Installation
Power Line Worker: Transmission281204-11Transmission System Maintenance
Power Line Worker: Transmission381301-12Construction, Maintenance and Repair- Live-Line Barehand
Power Line Worker: Transmission381302-12Reconductoring Transmission Lines
Power Line Worker: Transmission381303-12Construction, Maintenance and Repair- Hot Stick
Power Line Worker: Transmission338302-11Lift Planning

Additional Topics

Module credit can be earned within these different topics. Some of these modules are related to craft levels while others are standalone credentials.

Craft/TopicLevelModuleTitleCredit
Pipefitting308304-07Advanced Trade Mathx
Sustainable ConstructionN/A70101-15Your Role In the Green Environmentx
Electronic Systems Technician233201-10DC Circuitsx
Electronic Systems Technician233202-10AC Circuitsx
Safety TechnologyV575218-03Environmental Awarenessx